Elegoo Mercury X - Bundle

Elegoo Mercury X Wash and Cure

The Elegoo Mercury X is a wash and cure bundle that lets you clean and cure your resin-printed 3D models. The power socket is shared and the two machines can run at the same time for greater efficiency.

A design with a unique rotary knob that lets you monitor, adjust and control the progress of your post-processing very intuitively and quickly. You can run operations from 0 to 30 minutes for optimum cleaning and curing efficiency.

Cleaning station Elegoo Mercury X

The Elegoo Mercury X features an integrated cleaning station that allows you to properly clean your 3D models after printing and remove all resin residues. The Elegoo Mercury X wash can hold up to 8 litres of cleaning fluid and should be filled with water, IPA or cleaner depending on the resin used.

You can use up to two small trays at the same time or one large tray to clean several parts and be more efficient by increasing your production.

The Elegoo Mercury X has a very large volume and can clean large parts, from 180x121x153 mm when using the tray and up to 201x124x255 mm when not using the tray.

A motor drives a whirlpool system that agitates the liquid inside the cleaning tank to increase cleaning efficiency. The result is parts that are very well cleaned, very quickly.

Mercury X UV chamber Elegoo

The UV chamber included in the Elegoo Mercury X bundle lets you polymerise your 3D models after cleaning. Its transparent yellow cover blocks up to 99% of the UV light emitted by the machine. The structure of the curing machine tray will prevent parts from falling or tipping over.

The UV light system is uniform thanks to the 3 light sources in the Elegoo Mercury X curing station. Two vertical lights and one light under the tray ensure that your 3D model is cured evenly.

The tray of the Elegoo Mercury X is rotatable and is designed to rotate 360 degrees to cover parts evenly as they cure.