Anycubic Wash & Cure 3

Anycubic Wash & Cure 3 - Reinvented Post-Processing

The Anycubic Wash & Cure 3 is the ultimate 2-in-1 solution for post-processing resin prints, specifically designed for LCD printers of 7.3 inches or smaller.

This powerful device, with a 3-liter washing capacity, integrates seamlessly into the printing process. Compared to the previous model, the Wash & Cure 2, the Wash & Cure 3 brings significant improvements, with a doubled washing capacity of 3 liters, a total washing basket volume of 4 liters, and an increased curing size of 15%, now reaching 160 x 180 mm.

These modifications allow for the effective post-processing of larger models or multiple small objects in a single operation.

Advantages of the Anycubic Wash & Cure 3

This next-generation cleaning station enables faster post-processing with a larger capacity. Let’s explore all its features.

A larger volume

Compared to the previous Wash & Cure 2, the Wash & Cure 3 features a doubled washing capacity of 3 liters, a total washing basket volume of 4 liters, and an increased curing size of 15% to 160 x 180 mm, allowing for the treatment of larger models or multiple small objects at once.

More uniform curing

The Flexicure Gooseneck lamp increases energy output by 30,000 uW/cm² in an exposure area of 1 to 3 cm. The light spheres and lenticular light source have been arranged differently from the previous version, ensuring more uniform and thorough curing of hard-to-reach areas.

IPA savings with double-layer design

The Wash & Cure 3.0 features a sleek and minimalist design with two cleaning levels, including a basket (165 x 100 x 180 mm) and a suspension cleaning mode (165 x 100 x 165 mm). Its pearl-white tank is paired with a gray folding cover. The washing basket, made of rust-resistant PP, prevents oxidation issues seen in the previous version with a metal basket. Additionally, a matching translucent PP cleaning bucket is included.

Ultra-quiet – below 65 dB

Thanks to a more airtight structural design and software optimization, noise interference during washing and curing is reduced, creating a quieter and more comfortable working environment. The maximum operating noise is kept below 65 dB.

Very easy to use

The user-friendly control panel of the Wash & Cure 3.0 offers three operation modes: Wash, Cure, and FlexiCure (curing with the gooseneck lamp). Equipped with a touch button and control knob, each mode can be selected with a simple click and continuously adjusted using the rotary knob, allowing for control between 1 to 30 minutes.

Other features

The Wash & Cure 3.0 is equipped with a UV-blocking cover that blocks more than 99.9% of UV rays, a UV light source along the Z-axis with a 405 nm wavelength and 10 UV lamps, and a transparent PP curing platform.