PLA Silk Blue Forshape - 1.75mm - 1Kg

PLA Silk 1.75mm Blue Forshape

The PLA Silk filament is a PLA based material with a very attractive "silk" effect that will add a real plus to your decorative prints. Very often used by makers to produce decorative and utility parts, PLA Silk can also be found in the professional sector for packaging design and product prototyping. Finally, in education, it will add a little extra to pupils' and students' projects by highlighting certain parts in educational projects.

Its PLA -based composition makes this reel of PLA Silk a very easy-to-print material. PLA Silk Blue 1.75mn also contains a number of additives that give it greater mechanical resistance than standard PLA.

Highlights of the PLA Silk 1.75mm Blue filament

Satin effect: PLA Silk is the reference PLA filament for a silky, glossy and satin finish.

Reinforced filament: PLA Silk Blue is stronger and therefore more mechanically resistant than standard PLA.

Eco-responsible: PLA Silk Forshape Blue is sold wound on a cardboard spool that you can simply recycle after using the filament.

How to print PLA Silk 1.75mm

PLA Silk 1.75mm Blue Forshape is a filament compatible with all 3D printers equipped with a 1.75mm extrusion and compatible with the recommendations for use below.

This filament requires an extrusion temperature of between 205 and 225°C. A heating plate that will enable you to obtain a constant plate temperature between 0 and 60°C. Finally, we recommend a print speed of between 40 and 80 mm/s to optimise the quality of your prints.

We recommend that you carry out several tests and vary your print settings. You will obtain different results in terms of "brilliance" depending on the settings you use. Once opened, store your filament in a cool, dry place away from light to preserve its quality over time.