- 👨🔧 Premium After-sale service
- 🚚 Free delivery from €39.90
- 📦 Return under 14 days
- ✉️ Customer service
PolyMax Tough PETG ESD Black - 2.85mm - 500 g
Ref. PB03002
The PolyMax™ Tough PETG - ESD offers better mechanical properties than any normal PETG. What's more, the added carbon nanotubes make it resistant to ESD.
- Resistant to ESD
- High temperature
- Easy to print
€37.15 excl. VAT
VAT at 0%, which is €37.15 TTC including tax.
Ordered before 1:00 PM, delivered to your doorstep tomorrow!
Delivery within 48/72 hours
Order before 1pm. Same day shipping
Free delivery
Free delivery near you from €69.90
Premium support
Our teams are on hand to answer all your questions
Over 2000 products
A wide choice of products from the biggest brands
Using PolyMax PETG -ESD Black
PolyMax PETG -ESD Black from Polymaker is an improvedPETG filament with high mechanical properties. It is made up of carbon nanotubes which give it properties ESD.
PolyMax Tough PETG-ESD Black: key strengths
High strength: PolyMax PETG Black has higher mechanical strength than standard ABS or PETG and heat resistance up to 80°C.Quality and reliability: PolyMax PETG Black prints as easily as PLA, with no warping, shrinkage or odour.
Electrostatic discharge: This improved PETG-ESD filament from Polymaker has carbon nanotubes making it resistant to ESD
Our recommendations for use with PolyMax PETG -ESD
PolyMax PETG Black is compatible with all open 3D printers on the market in both 1.75 and 2.85mm.This reinforced PETG can be printed at extrusion temperatures of between 230 and 240°C and platen temperatures of between 70 and 80°C. A print speed of between 30 and 50mm/s is recommended.
For optimum adhesion, we recommend using a standard BuildTak or PEI sheet.
Finally, we recommend drying the reel at a temperature of 70°C for 8 hours to eliminate all moisture.
- 🎯 We collaborate with businesses.
- 📦 Stock in Europe
- 🚚 Ships within 24 hours
- 🔐 Secure payments
- 🔙 14 days to change your mind
- 📱 Need advices ? Contact technical support
Specifications for PolyMax Tough PETG ESD Black - 2.85mm - 500 g
Technologie / Produit
- Technology
- FDM
- Material
- PETG
- Visual aspect
- Opaque, Brilliant
- Diameter
- 2.85 mm
- Sensitivity to humidity
- Low
- Application
- Prototyping, Production, Functional part
- Odour
- Yes
- Harmful
- Yes
- Level of difficulty
- Novice
- Brand
- Polymaker
- Type of product
- 3D Filament
- Colour
- Black
- Net weight
- 500 g
Valeurs techniques
- Glass transition temperature
- 79 °C
- Deflection temperature under load (0.45 MPa)
- 76 °C
- Deflection temperature under load (1.8 MPa)
- 72 °C
- Temperature VICAT
- 82 °C
- Charpy
- 9.7 kJ/m² of energy
- Specific properties
- Waterproof
- Resistors
- Mechanical engineering, Chemical
- Tensile modulus
- 1523 Mpa
- Flexural modulus
- 1068 MPa
- Tensile yield strength
- 32 MPa
- Tensile strength
- 58 MPa
- Maximum elongation at break
- 4.43 %
- Density
- 1.24 g/cm3
Extrusion
- Nozzle type
- Brass
- Type of consumable
- Non-proprietary filament (open system)
- Min. plateau temperature
- 70 °C
- Max. tray temperature
- 80 °C
- Min. extrusion temperature
- 230 °C
- Max. extrusion temperature
- 240 °C
- Min. speed
- 30 mm/s
- Max. speed
- 50 mm/s
- Minimum nozzle diameter
- 0.2 mm
- Bowden compatibility
- Yes
- Warping sensitivity
- Average
- AMS compatible
- Yes (with adapter)
Équipements spécifiques
- Closed printing enclosure
- Yes
- Filtration
- HEPA, Coal
Installation / Prérequis
- Type
- Filament on spool
- Box supplied
- Yes
- Coil material
- Plastic
- Also find this product PolyMax Tough PETG ESD Black - 2.85mm - 500 g in these categories:
- 3D Filament
- PETG
- PETG / CPE - HT
- Outdoor use
- Mechanical use
- Chemical resistance
- Filament ESD
- High temperature
- Polymaker
- 2.85 / 3 mm
- Glossy filament
- Polymax
- AMS compatible
Customer reviews about PolyMax Tough PETG ESD Black - 2.85mm - 500 g
Customer questions about PolyMax Tough PETG ESD Black - 2.85mm - 500 g
No questions have been asked about this product yet.
You might also like
- Eco-friendly
- Made In France
