PA Rail Nanovia (EN 45545-2) - 1.75mm - 500 g

Use of PA Rail de Nanovia

This material, specifically designed for use in high-tech sectors such as railways, meets and complies with the criteria of standard NF EN 45545-2.

Based on standardised materials, it ensures safety in the event of fire by preventing the spread of smoke or flames. It ismade from polyamide (nylon) and ceramic flame retardants. Easy to print, it does not require a closed enclosure.

PA Rail is used for functional part applications such as electrical equipment controls, handles and buttons, armrests, etc.

Nanovia PA-Rail: key points

EN 45545-2: PA Rail complies with this standard, which is essential for certain rail applications.

Non-flammable: Made from standardised materials, this filament is non-flammable.

Very good adhesion: No warping during printing

Easy to print: Can be printed without an enclosure

Our recommendations for use with Nanovia PA Rail filament

The Nanovia PA Rail filament has an extrusion temperature ideally between 260 and 280°. A heating plate at 70°C to 80°C is recommended.

Nylon is sensitive to humidity, so we recommend that you store your spool in a dry place with a desiccant. If it has been exposed to humidity or open air, please steam your filament at 60°C for 4 hours or more.

Finally, the use of a printer with an air extraction or filtered enclosure is highly recommended.