PETG-CF Titan Gray Bambu Lab - 1.75 mm - 1 kg

PETG-CF Bambu Lab - 1.75 mm - 1 kg

Bambu PETG-CF Titan Gray is a composite material made from PETG and carbon fibre. The new formula has significantly improved print quality by reducing nozzle clogging and lump formation compared with traditional PETG. Thanks to the addition of carbon fibre, Bambu PETG-CF offers greater resistance while retaining good strength and a glossy appearance. It is an ideal material for drone parts, racing models and various functional parts that require both high performance, particularly in terms of impact resistance, and an elegant appearance.

PETG-CF Titan Gray Bambu Lab key benefits

Less clumping and stringing: Bambu PETG-CF is improved thanks to a modified formula that specifically addresses the problem of clumping and sticking to the nozzle when printing PETG.

Top-of-the-range printing surface: Carbon fibre provides an advanced texture to the printing surface, while retaining the gloss of PETG itself.

Carbon fibre texture: Carbon fibre provides a soft reflection, minimal layer lines and a unique delicate texture.

RFID for intelligent printing: All printing parameters are integrated into the RFID chip, which can be read via our AMS (Automatic Material System) system. Load and print! No more tedious setting up.

Our recommendations for use with Bambu Lab PETG-CF

The spool of PETG-CF is fitted with an RFID chip that enables automatic detection of the filament by the AMS (Automatic Material System) system.

All the printing parameters are stored in this chip beforehand, which improves productivity. Bambu Lab recommends printing PETG-CF with an extrusion temperature of between 240 and 270°C, a platen temperature (with adhesive) of between 65 and 75°C, and a maximum print speed of 200 mm/s.