- 👨🔧 Premium After-sale service
- 🚚 Free delivery from €39.90
- 📦 Return under 14 days
- ✉️ Customer service
Ultrafuse PET CF15 BASF - 2.85mm - 750 g
Ref. PCF-0350b075
The Ultrafuse PET-CF15 filament combines ease of processing and very low moisture absorption with excellent strength and rigidity at an affordable cost. UltrafusepET CF15 is a polyethylene reinforced with 15% carbon fibre.
- Strong, rigid components
- Easy to process
- Very low moisture absorption
- Heat resistant up to 108°C
€67.15 excl. VAT
VAT at 0%, which is €67.15 TTC including tax.
Ordered before 1:00 PM, delivered to your doorstep tomorrow!
Delivery within 48/72 hours
Order before 1pm. Same day shipping
Free delivery
Free delivery near you from €69.90
Premium support
Our teams are on hand to answer all your questions
Over 2000 products
A wide choice of products from the biggest brands
Use of the Ultrafuse PET CF15 filament
The Ultrafuse® PET CF15 filament is an engineering filament optimised to enable users to develop new 3D printing applications with higher requirements. With its superior heat resistance, high strength and stiffness, this filament is suitable for a wide range of demanding industrial applications. Its high dimensional stability and very low moisture absorption make it a perfect solution for applications in humid operating environments.
This engineered filament is easier to process than other carbon fibre reinforced filaments. Users will be able to 3D print new components that remain fully functional under higher mechanical and thermal loads.
It works in any filament 3D printer equipped with a reinforced nozzle.
In addition, Ultrafuse PET CF15 is compatible with BVOH, the water-soluble carrier material and HIPS, making it possible to print complex geometries that work in harsh environments.
Ultrafuse PET-CF15: key strengths
- Solid, rigid components
- Easy to process
- Very low moisture absorption
- Heat resistant up to 108°C
- High dimensional stability
- Compatible with BVOH and HIPS for the substrate
- Excellent surface finish
Our recommendations for use with BASF Ultrafuse PET CF15
BASF 's Ultrafuse PET CF15 filament is easy to print. You need a 3D printer that can extrude the filament at between 250 and 270°C at a speed of between 30 and 80mm/s. The platen must be heated to between 65 and 85°C. BASF recommends using a light layer of glue to protect the platen during printing.
- 🎯 We collaborate with businesses.
- 📦 Stock in Europe
- 🚚 Ships within 24 hours
- 🔐 Secure payments
- 🔙 14 days to change your mind
- 📱 Need advices ? Contact technical support
Specifications for Ultrafuse PET CF15 BASF - 2.85mm - 750 g
Technologie / Produit
- Material
- PETG
- Sensitivity to humidity
- Low
- Application
- Production, Large format, Functional part, Extreme
- Type of product
- 3D Filament
Valeurs techniques
- Deflection temperature under load (0.45 MPa)
- 107 °C
- Deflection temperature under load (1.8 MPa)
- 80 °C
- Charpy
- 5.5 kJ/m² of energy, 29 kJ/m² of energy
- Composite
- Carbon
- Percentage of fibre
- 15 %
- Flexural modulus
- 7350 MPa
- Density
- 1.38 g/cm3
Extrusion
- Filament diameter
- 2.85 mm
- Nozzle type
- Steel
- Nozzle diameter
- 0.6 mm, 0.8 mm
- Min. speed
- 40 mm/s
- Max. speed
- 80 mm/s
- AMS compatible
- No
- Also find this product Ultrafuse PET CF15 BASF - 2.85mm - 750 g in these categories:
- 3D Filament
- PETG
- PETG / CPE Composites
- Composite filaments
- Outdoor use
- Mechanical use
- Carbon fibre
- BASF
- 2.85 / 3 mm
- Mat filament
Customer reviews about Ultrafuse PET CF15 BASF - 2.85mm - 750 g
Customer questions about Ultrafuse PET CF15 BASF - 2.85mm - 750 g
No questions have been asked about this product yet.
You might also like
