Einscan-SP V2

Shining 3D scanner Einscan SP

With an accuracy of up to 50 microns, this Einscan SP scanner lets you model objects quickly. It has two scanning modes and calibrates automatically. There's nothing to configure.

The Einscan software lets you choose the scan mode you want to use and guides you through the various settings for your scanner. Its rotary table makes a 360° scan possible in 45 seconds, while a fixed plane takes 1 second.

The Einscan SP is perfect for education, design, art, the digital industry or archiving objects.

You will need to use a matte spray to scan transparent or metal parts.

Two scanning modes available

The Einscan SP 3D scanner has two scanning modes. Its automatic platen lets you scan parts up to 200 x 200 x 200 mm on its own.

It can also be placed on a tripod (supplied) to offer a manual experience with a single shot, enabling you to scan objects measuring up to 1200 x 1200 x 1200 mm.

All with a high accuracy of 0.05 mm (50 microns).

Post-processing

The Einscan software used to scan objects with your Einscan SP will enable you to digitally post-process parts after printing. This allows you to fill in holes, erase imperfections caused by scanning and make your modelled objects printable on a 3D printer.

Calibration of the Einscan SP 3D scanner