Ultracur3D® RG 35 B Black BASF - 1000 ml

Use of Ultracur3D® RG 35 B Black resin BASF

Ultracur3D® RG 35 B Black resin is one of a range of urethane resins developed by the manufacturer BASF designed for 3D resin printers using DLP/ LCD 405nm technology.

The RG series is the most rigid and hardest resin range, suitable for the most demanding applications requiring high rigidity without deformation.

The black Ultracur3D® RG 35 B resin has the highest flexural modulus in the Ultracur3D range(2600 MPa) and the highest thermal stability.

Rigid (85 D), tensile (80 MPa) and temperature (83°C) resistant, Ultracur3D RG35 B resin is ideal for functional applications.

Its propensity not to absorb water makes it a resin that resists time and wet environments.

Ultracur3D® RG 35 B Black resin: key strengths

High rigidity: Ultracur3D® RG 35 B Black from BASF is the most rigid resin, offering an excellent compromise between strength and rigidity. It has a flexural modulus of 2600 MPa and a strength of 80 MPa. This photo reactive resin BASF RG35B also offers excellent stability thanks to its low shrinkage rate. It offers unique performance for all kinds of prototyping applications and functional parts for your most technical applications.

Temperature resistance: Ultracur3D® RG 35 B urethane resins are the most temperature resistant. It has a deflection temperature under load (0.45 mPa) of up to 83°C.

Water resistance: As Ultracur3D® RG 35B resins are not very sensitive to water(0.33% absorption in 24 hours), they can be used for applications in damp environments without any loss of performance or dimensional accuracy. The other advantage of this low sensitivity to water is that you can use water to clean your parts.

Our recommendations for use with RG35 B resin

This photo reactive material is very sensitive to light, so protect the resin from UV light once the bottle has been opened.

We also recommend that you wear gloves when handling the resin.

Shake your bottle of resin before use and leave it to stand for a few minutes after filling your printing tank. This is to allow any air bubbles to disappear.

To determine the exposure parameters best suited to your 3D printer, don't hesitate to consult our experts.

After cleaning with alcohol and drying for a few moments, don't forget to finish the post-treatment process by going into a UV chamber to obtain the performance you've advertised (around 20 minutes depending on the size and thickness).