Ortho Model resin Forshape Premium - 1 kg

Using Ortho Model resin Forshape

Ortho Model resin Forshape is an economical yet premium-quality solution. Developed specifically for DLP and LCD light sources, this 3D printing resin offers excellent technical and aesthetic characteristics.

Thanks to its composition, it achieves a Shore hardness of 88D, has low shrinkage and minimises odours.

It can be used to create precise models with a high level of detail and a smooth finish.

Ortho Model resin Forshape: key strengths

High level of detail: Forshape photopolymer resin is specially designed to reduce volume shrinkage during the polymerisation process, ensuring high precision of the printed model with a smooth finish.

Temperature resistance: This resin, developed specifically for models and thermoforming, is ideal for the production of aligners.

Low odour: The composition of this standard resin results in a light odour and limits irritating odours during printing.

Our recommendations for use with Ortho Model resin Forshape

For printers LCD with a monochrome screen, the base layer is 25 to 50 seconds and the exposure time for each layer is 2 to 4 seconds. Simply adjust the exposure times according to the height of the layer required, and leave the rest as is.

Cleaning the Ortho Model resin

Place the printed part in the wash tank of your post-processing station and fill your tank with99.9% Isopropanol (minimum 95% alcohol).

Start cleaning the part for a few minutes. Rinse the part with water before drying it. Make sure it is 100% dry, as residual alcohol can cause white spots or cracks over time.

Post-curing

The curing time of the printed model is proportional to the size of the part and inversely proportional to the optical power of the curing device to the optical power of the curing chamber.

The average exposure time is between 15 and 30 minutes. Don't forget to use fresh air to dry them after post-curing.

Precautions for use

Shake well before use. Wear a mask and gloves when handling.

This product cannot be taken orally. Keep away from children. Do not get product in eyes. In the event of accidental contact, rinse with plenty of water as soon as possible. Otherwise, seek medical advice immediately.

We recommend storing the resin at a temperature between 15°C and 35°C. The lower the storage temperature, the higher the viscosity of the resin. The bottle must be sealed and airtight against dust and humidity, both of which can affect print quality. Keep the resin as far away from the sun as possible, as the sun contains a lot of ultraviolet light, which can harden the photosensitive resin.