Eco-friendly

PolyTerra PLA Mint - 2.85mm - 1 kg

Name: PolyTerra PLA Mint - 2.85mm - 1 kg
Brand: Polymaker
SKU: PM70870
Price: 16.52 EUR
Availability: OutOfStock

Ref. PM70870

PolyTerra PLA Mint is an environmentally-friendly recyclable filament made from PLA and organic materials, offering high print quality.

€16.52 ^{excl. VAT}

VAT at 0%, which is €16.52 TTC including tax.

Out of stock Free shipping for orders over 69.9€

Delivery within 48/72 hours

Order before 1pm. Same day shipping

Free delivery

Free delivery near you from €69.90

Premium support

Our teams are on hand to answer all your questions

Over 2000 products

A wide choice of products from the biggest brands

Use of PolyTerra Menthe

The eco-friendly PLA PolyTerra Mint filament was developed by Polymaker using a technique called"Fully Bio Compound (FBC)" which translates to a blend of PLA (a biodegradable polymer made from corn, beet and wheat starch) and organic minerals.

If you're looking for a cost-effective or eco-friendlyPLA filament, or both, the PLA PolyTerra ™ ️ filament is definitely your first choice.

PolyTerra filament is used for everything from simple prototyping to a finished decorative or accessory piece.

avantages polyterra filament ecologique

PolyTerra Mint: key strengths

Excellent value for money: this filament offers very high quality at under €20 per kilo.

Stiffness: the PolyTerra PLA Mint filament is stiffer than standard PLA filament.

Eco-responsibility: the manufacturer Polymaker has made a commitment via the ONETREEPLANTED association to plant a tree for each spool of PolyTerra sold.

Recycled spool: the spool and packaging of PolyTerra Mint filament are entirely recycled to protect the environment.

Matt finish: give your prints a unique look with PolyTerra Mint's matt finish.

Food contact compliant: Polymaker PolyTerra complies with RoHS 2011/65/EU, 2015/863 and REACH directives.

Our recommendations for use with PolyTerra

PolyTerra Mint is compatible with all open 3D machines on the market, whether in 1.75 or 1.75 mm 2.85mm.

We recommend that you set your printer to an extrusion temperature of between 190 and 230°C in order to print PolyTerra Menthe under optimum conditions. A print speed of between 30 and 70mm/s and the use of a heating plate between 25 and 60°C are also recommended.

If your printer is equipped with a direct drive extrusion system, the recommended shrink distance is 1mm at a speed of 20mm/s. If your printer uses Bowden extrusion, the recommended shrink distance is 3mm and a speed of 40mm/s.

Finally, for food contact compliance, although PolyTerra Menthe complies with the main standards, some printed parts may have cracks and holes that are invisible to the naked eye. Bacteria in general are prone to proliferate in these areas.