PolyTerra PLA Edition-R (Recycled) Black - 1.75mm - 1 kg

Using PolyTerra Black Edition-R

The eco-friendly PLA filament PolyTerra Noir Edition-R has been developed by Polymaker with a technique called"Fully Bio Compound (FBC)" which translates into a blend of PLA (a biodegradable polymer made from corn, beet and wheat starch) and organic minerals.

If you're looking for a cost-effective or eco-friendlyPLA filament, or both, the PLA PolyTerra™ ️ filament is definitely your first choice. What's more, if used as a backing material, PolyTerra™ ️PLA can be easily removed.

This one unlike standard PolyTerra is made from 30% post-industrial PLA .

PolyTerra filament is used for everything from simple prototyping to a finished decorative or accessory part.

PolyTerra Black Edition-R: key strengths

Excellent value for money: this filament offers very high quality at over €20 per kilo.

Rigidity: the PolyTerra PLA Noir Edition-R filament is stiffer than standard PLA filament.

Eco-responsibility: the manufacturer Polymaker has made a commitment via the ONETREEPLANTED association to plant a tree for each spool of PolyTerra sold. In addition, 30% of PLA is recycled.

Recycled spool: the spool and packaging of PolyTerra Black Edition-R filament are entirely recycled to respect the environment.

Matt finish: give your prints a unique look with the matt finish of PolyTerra Noir Edition-R.

Food contact compliant: Polymaker PolyTerra complies with RoHS 2011/65/EU, 2015/863 and REACH.

Our recommendations for use with PolyTerra

PolyTerra Black Edition-R is compatible with all open 3D machines on the market, whether in 1.75 or 1.75 mm 2.85mm.

We recommend that you set your printer to an extrusion temperature of between 190 and 230°C in order to print PolyTerra Noir Edition-R under optimum conditions. A print speed of between 30 and 70mm/s and the use of a heating plate between 25 and 60°C are also recommended.

If your printer is equipped with a direct drive extrusion system, the recommended shrink distance is 1mm at a speed of 20mm/s. If your printer uses Bowden extrusion, the recommended shrink distance is 3mm and a speed of 40mm/s.

Finally, for food contact compliance, while PolyTerra Black Edition-R complies with the main standards, some printed parts may have cracks and holes that are invisible to the naked eye. Bacteria in general are prone to proliferate in these areas.