PolyLite PLA Pro Blue - 1.75mm - 1 kg

Using PolyLite™ PLA Pro Blue 1.75mm

The PolyLite™ PLA Pro filament is a material that falls between two existing PLA ranges from Polymaker. The Polylite PLA Pro Blue provides high impact resistance while combining the excellent stiffness of PLA with the other properties of a standard PLA.

Polylite PLA PRO with an excellent combination of impact resistance and stiffness - Polymaker PolyLite PLA PRO is an improved PLA filament that has even higher impact resistance than ordinary ABS. At the same time, it is 1.6 times stiffer than other PLA 1.75 mm filaments. The excellent combination of toughness and stiffness is a real breakthrough for the 3D printer filament industry, making it perfect for mechanically demanding applications.

PolyLite PLA Pro Blue filament: Key strengths

Excellent impact resistance : this filament combines the properties of PolyLite and PLA PolyMax

Online manual: all the documentation is online (manual, print profile, etc.) to reduce the amount of paper required.

Silky surface: very beautiful colours and a wide range of choices

Our recommendations for use with PolyLite™ PLA Pro Blue 1.75mm

Printing PolyLite PLA Pro Blue is very simple, here are the printing recommendations: extrusion temperature of 190 to 220°C and a speed of between 30 and 70mm/s.

The use of a heating plate is recommended but not necessary. PLA PolyLite PLA Pro Blue is not subject to warping or peeling and prints on most printing surfaces (glass, tape, BuildTak).

Polymaker PolyLite PLA Pro Blue 1.75mm is compatible with 3D printers extruding filament with a diameter of 1.75mm.