- Eco-friendly
- 👨🔧 Premium After-sale service
- 🚚 Free delivery from €69.90
- 📦 Return under 14 days
- ✉️ Customer service
PVA 2.85mm (M-PVA) Forshape Premium - 500g
The PVA 2.85mm Forshape is a water-soluble filament for creating ephemera with a wide range of professional-quality materials. This filament is an improvedPVA which limits moisture pick-up and dissolves faster than standard PVA.
PVA 2.85mm from Forshape is compatible with many materials such as PLA, TPU, PETG,ABS,ASA or Nylon(See our recommendations at the bottom of the page).
VAT at 0%, which is €15.56 TTC including tax.
Delivery within 48/72 hours
Order before 1pm. Same day shipping
Free delivery
Free delivery near you from €69.90
Premium support
Our teams are on hand to answer all your questions
Over 2000 products
A wide choice of products from the biggest brands
Filament PVA 2.85mm improved (M-PVA)
PVA or polyvinyl alcohol is used with dual extrusion printers to produce print media in a water-soluble material. By simply immersing your part in water (cold or warm), you can dissolve the supports and recover a finished part.
PVA 2.85mm is used by professionals to manufacture complex parts. It improves the printing process when the carrier has to be inside a part and is complicated to remove, for example.
PVA 2.85mm is very often used with PLA, TPU and PETG but it can be used and is compatible with more technical materials by following a few instructions below.
PVA / M-PVA 2.85mm strengths Forshape
Moisture resistance : The PVA 2.85mm filament from Forshape is improved and its methanol-based composition makes it less prone to moisture pick-up. However, we recommend that you take care when storing this fragile material.
Highly compatible: Compatible with a wide range of materials, including PLA, TPU and PETG. Follow the advice at the bottom of the page for more technical materials (ABS, ABS-X, ASA, PA).
Good print stability: This improved material will behave better and be more stable during printing than a standard PVA.
Faster dissolving: This filament dissolves very quickly in water. Take care when storing to avoid damaging this fragile filament.
Printing tips
PVA 2.85mm Forshape Black is a filament compatible with all 3D printers equipped with a 2.85mm extrusion and compatible with the recommendations for use below.
This filament requires an extrusion temperature of between 180 and 220°C. A heating plate that will enable you to obtain a constant plate temperature of between 40 and 60°C.
For printing materials other than PLA, TPU and PETG, the platen temperature range of PVA Forshape will be too low. We therefore recommend that you print a 100%raft on PVA and set the platen temperature to that of PVA.
We recommend that you set the temperature, shrinkage and standby time for nozzle changes in your Slicer to avoid clogging your nozzles.
Make sure you store your PVA 2.85mm coils in a dry place.
Post-processing your parts PVA
After printing, we recommend that you immerse your parts with the PVA backing directly in water (cold or lukewarm). It's best if the water is stirred regularly so that the PVA is eliminated evenly and effectively.
- 🎯 We collaborate with businesses.
- 📦 Stock in Europe
- 🚚 Ships within 24 hours
- 🔐 Secure payments
- 🔙 14 days to change your mind
- 📱 Need advices ? Contact technical support
Specifications for PVA 2.85mm (M-PVA) Forshape Premium - 500g
Technologie / Produit
- Technology
- FDM
- Material
- Support
- Visual aspect
- Translucent
- Bio-sourced
- No
- Diameter
- 2.85 mm
- Sensitivity to humidity
- Strong
- Application
- Aesthetics, Prototyping
- Odour
- No
- Harmful
- No
- Level of difficulty
- Intermediate
- Brand
- Forshape
- Type of product
- 3D Filament
- Colour
- Natural
- Net weight
- 500 g
Valeurs techniques
- Tensile modulus
- 3500 Mpa
- Density
- 1.19 g/cm3
Extrusion
- Nozzle type
- Brass
- Type of consumable
- Non-proprietary filament (open system)
- Min. plateau temperature
- 60 °C
- Max. tray temperature
- 90 °C
- Min. extrusion temperature
- 210 °C
- Max. extrusion temperature
- 230 °C
- Min. speed
- 30 mm/s
- Max. speed
- 60 mm/s
- Minimum nozzle diameter
- 0.4 mm
- Bowden compatibility
- Yes
- Warping sensitivity
- Low
- AMS compatible
- No
Équipements spécifiques
- Closed printing enclosure
- No
- Filtration
- Without
Installation / Prérequis
- Type
- Filament on spool
- Box supplied
- Yes
- Coil material
- Cardboard
- Also find this product PVA 2.85mm (M-PVA) Forshape Premium - 500g in these categories:
- 3D Filament
- PVA / BVOH / Breakaway
- Eco-responsible
- Bobine carton
- Filament support
- Forshape
- 2.85 / 3 mm
- 3D printer special offer
- 30% discount and more
- Forshape Premium
Customer reviews about PVA 2.85mm (M-PVA) Forshape Premium - 500g
Customer questions about PVA 2.85mm (M-PVA) Forshape Premium - 500g
No questions have been asked about this product yet.
You might also like