ABS Red Forshape Premium - 2.85mm - 1Kg

ABS Red filament Forshape 2.85mm

ABS Red filament from Forshape is a high-grade ABS (acrylonitrile butadiene styrene) filament that can be used to print highly resistant 3D parts. The properties of this material mean that 3D objects are long-lasting and solid. ABS Red 2.85mm is lightweight and highly resistant to impact and deformation. It is also perfect for temperature resistance.

The ABS 2.85mm Red thread from Forshape will enable you to print 3D parts that you can post-process. Drill holes or sand your object. You can also easily smooth your parts with acetone.

Use of the ABS Red Forshape filament 2.85mm

This ABS Red Forshape filament with a diameter of 1.75mm is very often used in the professional sector. It is used in the design and manufacture of high-performance technical parts. Common applications for this material are rapid prototyping, shape validation and production parts.

The ABS Red Forshape filament gives a more matt appearance and finish than other materials. The ABS thread is therefore closer to the appearance of injected finished products. The Red ABS 3D thread is widely used in 3D printing because it is so widely used in industry.

Key features of ABS 1.75mm Red Forshape

High impact resistance: The ABS Red 1.75mm Forshape Premium filament offers very good resistance to impact and deformation.

Thermal resistance: ABS is naturally resistant to temperature and starts to change state at around 100°C.

Eco-friendly:ABS Forshape Red is sold wound on a cardboard spool that you can simply recycle after using the filament.

How do I printABS Forshape 1.75mm Red?

ABS Forshape Red is a filament compatible with all 3D printers equipped with a 2.85mm extrusion and compatible with the recommendations for use below.

This filament requires an extrusion temperature of between 240 and 260°C. A heating plate that will enable you to obtain a constant plate temperature of between 90 and 100°C. Finally, we strongly recommend that you use a 3D printer housing or a 3D printer with a closed enclosure. This will limit warping and increase the interlayer bonding of your part.